COM / Serial (RS-232) |
On this tab you can choose which COM port at which baud rate should be used to establish communication with WolfVision Visualizers. note
To recall the default settings for this dialog tab, click "Reset settings". The other tabs of the "Preferences" dialog box are not affected.
If you want to work with Visualizers connected via the COM port (RS-232) you can check the box in order to enable the device discovery for RS-232 Visualizers. This will also speed down the process of detecting all available Visualizers while refreshing the list of connected Visualizers.
For each COM port installed on your computer an entry can be found in the list of available connections. Simply select the COM port connection and baud rate you want to use for device discovery (selected baud rate has to match the setting of the Visualizer).
With "All baud rates off" / "All baud rates on" you can enable or disable all baud rates of the currently selected COM port.
Use the virtual COM port to fix interrupted firmware updates.